Seaboard Asphalt Ezee Stir Tar Emulsion Topcoat and Sealer

Quick Overview

• Basic Uses : Ezee Stir Tar Emulsion Topcoat and Sealer is used as a protective coating on bituminous surfaces from petroleums and elements of the weather and traffic wear.
• Limitations : DO NOT ALLOW material to freeze. DO NOT USE on concrete. DO NOT USE on bituminous surfaces less than four months old.
• Application : Ezee Stir Tar Emulsion Topcoat and Sealer must be applied to a surface that is dry free of all foreign matter and residues. This material must remain under dry conditions until it is cured. This material can be applied by brush, squeegee, or spray equipment and should yield a coverage rate of 40-60 square feet per gallon. This material should be\r\napplied on a surface that is slightly damp for best results.
• Storage : Ezee Stir Tar Emulsion Topcoat and Sealer must be kept from freezing.
• Composition : Refined Coal Tar - CAS 65996-90-9, Clay - CAS 1332-58-7, Quartz - CAS 1480860-7, Water - CAS 7732-18-5, Crystalline Sand - CAS 14808-60-7, Polymer - CAS 9003-18-3