Covalence MPSM

Covalence Products

SKU / Product InfoQuantity
MPSM-C30-UNIV-300-DN100
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 100 mm (4”)
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN110
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 110 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN120
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 120 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN130
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 130 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN140
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 140 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN150
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 150 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN160
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 160 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN170
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 170 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN180
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 180 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN190
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 190 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN200
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 200 mm (8”)
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN210
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 210 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN220
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 220 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN230
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 230 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN240
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 240 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN250
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 250 mm (10”)
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN260
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 260 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN270
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 270 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN280
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 280 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN290
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 290 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN300
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 300 mm (12”)
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN310
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 310 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN320
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 320 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN330
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 330 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN340
  • Sleeve width (nominal width): 340 mm
  • Nominal pipe diameter: 300 mm (12”)
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN350
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 350 mm (14”)
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN360
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 360 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN370
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 370 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN380
  • Sleeve width (nominal width): 380 mm
  • Nominal pipe diameter: 300 mm (12”)
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN390
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 390 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN400
  • Sleeve width (nominal width): 400 mm (16”)
  • Nominal pipe diameter: 300 mm (12”)
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN410
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 410 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN420
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 420 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN430
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 430 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN440
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 440 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN450
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 450 mm (18”)
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN460
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 460 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN470
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 470 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN480
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 480 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN490
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 490 mm (12”)
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN500
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 500 mm (20”)
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN510
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 510 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN520
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 520 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN530
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 530 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN540
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 540 mm (12”)
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN550
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 550 mm (22”)
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN560
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 560 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN570
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 570 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN580
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 580 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN590
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 590 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN600
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 600 mm (24”)
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN610
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 610 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN620
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 620 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN630
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 630 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN640
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 640 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN650
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 650 mm (26”)
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN660
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 660 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN670
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 670 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN680
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 680 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN690
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 690 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN700
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 700 mm (28”)
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN80
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 80 mm (3.50”)
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MPSM-C30-UNIV-300-DN90
  • Sleeve width (nominal width): 300 mm (12”)
  • Nominal pipe diameter: 90 mm
  • Tensile strength at break: 22.8 MPa (3300 psi)
  • Elongation at break: 600%
  • Hardness, Shore D: 57

Quick Overview

    The tubular MPSM is heat-shrinkable socket joint corrosion protection coatings. MPSM is typically used on steel or ductile iron pipes coated with PE, concrete or other coatings, i.e. paint and zinc. MPSM is also used to coat reducers, bends and dielectrical joints. For specially designed bell & spigot type joints, please refer to our special range of products (TISK, TISW-F, TISKW-F). Construction: Two-layer system First layer: Visco-elastic adhesive sealant. Second layer: Thick-walled, radiation cross-linked, high density polyethylene. Features of the product include: backing with enhanced shrink ratio, high impact strength & high penetration resistance, fully retains the deflection and longitudinal movement of the socket joint, seal resists vibration, deflection and axial movement, no special filler needed, no primer needed, no special equipment needed, and low preheat requirements. Benefits of the product: conforms easily to socket joint shapes, virtually no risk of damage during operation, no break of the sealing ring, reliable, high-performance seal stops water ingress, simple 1 part installation, keeps installation costs low, and fast installation which saves time.
Interested in this item or want more information?

Hours:

Phone: 610-992-9700

Email: sales@gattimorrison.com

Can't find what you want? Give us a call and we can help you find it.

Additional Information

Manufacturer: Covalence Products
For More Information on the Covalence MPSM, [Click Here] to Link to Manufacturer Web Site
 
Powered by 48ws.com
© 2024 Gatti Morrison