Covalence MEPS Uni-sleeve

Covalence Products

SKU / Product InfoQuantity
MEPS-C30-E-(UNIV)-DN1000-300
  • Nominal pipe diameter: 1000 mm (40”)
  • Sleeve width (nominal width): 300 mm (12”)
  • Tensile strength at break: 22.8 MPa
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MEPS-C30-E-(UNIV)-DN150-300
  • Nominal pipe diameter: 150 mm (6.625”)
  • Sleeve width (nominal width): 300 mm (12”)
  • Tensile strength at break: 22.8 MPa
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MEPS-C30-E-(UNIV)-DN200-300
  • Nominal pipe diameter: 200 mm (8”)
  • Sleeve width (nominal width): 300 mm (12”)
  • Tensile strength at break: 22.8 MPa
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MEPS-C30-E-(UNIV)-DN250-300
  • Nominal pipe diameter: 250 mm (10”)
  • Sleeve width (nominal width): 300 mm (12”)
  • Tensile strength at break: 22.8 MPa
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MEPS-C30-E-(UNIV)-DN300-300
  • Nominal pipe diameter: 300 mm (12”)
  • Sleeve width (nominal width): 300 mm (12”)
  • Tensile strength at break: 22.8 MPa
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MEPS-C30-E-(UNIV)-DN350-300
  • Nominal pipe diameter: 350 mm (14”)
  • Sleeve width (nominal width): 300 mm (12”)
  • Tensile strength at break: 22.8 MPa
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MEPS-C30-E-(UNIV)-DN400-300
  • Nominal pipe diameter: 400 mm (16”)
  • Sleeve width (nominal width): 300 mm (12”)
  • Tensile strength at break: 22.8 MPa
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MEPS-C30-E-(UNIV)-DN450-300
  • Nominal pipe diameter: 450 mm (18”)
  • Sleeve width (nominal width): 300 mm (12”)
  • Tensile strength at break: 22.8 MPa
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MEPS-C30-E-(UNIV)-DN500-300
  • Nominal pipe diameter: 500 mm (20”)
  • Sleeve width (nominal width): 300 mm (12”)
  • Tensile strength at break: 22.8 MPa
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MEPS-C30-E-(UNIV)-DN550-300
  • Nominal pipe diameter: 550 mm (22”)
  • Sleeve width (nominal width): 300 mm (12”)
  • Tensile strength at break: 22.8 MPa
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MEPS-C30-E-(UNIV)-DN600-300
  • Nominal pipe diameter: 600 mm (24”)
  • Sleeve width (nominal width): 300 mm (12”)
  • Tensile strength at break: 22.8 MPa
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MEPS-C30-E-(UNIV)-DN650-300
  • Nominal pipe diameter: 650 mm (26”)
  • Sleeve width (nominal width): 300 mm (12”)
  • Tensile strength at break: 22.8 MPa
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MEPS-C30-E-(UNIV)-DN700-300
  • Nominal pipe diameter: 700 mm (28”)
  • Sleeve width (nominal width): 300 mm (12”)
  • Tensile strength at break: 22.8 MPa
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MEPS-C30-E-(UNIV)-DN750-300
  • Nominal pipe diameter: 750 mm (30”)
  • Sleeve width (nominal width): 300 mm (12”)
  • Tensile strength at break: 22.8 MPa
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MEPS-C30-E-(UNIV)-DN800-300
  • Nominal pipe diameter: 800 mm (32”)
  • Sleeve width (nominal width): 300 mm (12”)
  • Tensile strength at break: 22.8 MPa
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MEPS-C30-E-(UNIV)-DN850-300
  • Nominal pipe diameter: 850 mm (34”)
  • Sleeve width (nominal width): 300 mm (12”)
  • Tensile strength at break: 22.8 MPa
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MEPS-C30-E-(UNIV)-DN900-300
  • Nominal pipe diameter: 900 mm (36”)
  • Sleeve width (nominal width): 300 mm (12”)
  • Tensile strength at break: 22.8 MPa
  • Elongation at break: 600%
  • Hardness, Shore D: 57
MEPS-C30-E-(UNIV)-DN950-300
  • Nominal pipe diameter: 950 mm (38”)
  • Sleeve width (nominal width): 300 mm (12”)
  • Tensile strength at break: 22.8 MPa
  • Elongation at break: 600%
  • Hardness, Shore D: 57

Quick Overview

    The wrap-around MEPS is a heat-shrinkable socket joint corrosion protection coating uni-sleeve. MEPS is typically used on steel or ductile iron pipes coated with PE, concrete or other coatings, i.e. paint and zinc. MEPS is also used to coat reducers, bends and dielectrical joints. For specially designed bell & spigot type joints, please refer to our special range of products (TISK, TISW-F, TISKWF). Construction: Two-layer system First layer: Visco-elastic butyl based adhesive. Second layer: Thick-walled, radiation cross-linked, high density polyethylene. Features of the product include: backing with enhanced shrink ratio, high impact strength & high penetration resistance, fully retains the deflection and longitudinal movement of the socket joint, seal resists vibration, deflection and axial movement; no special filler needed, no primer needed, no special equipment needed, low preheat requirements. Benefits of the product include: conforms easily to socket joint shapes, virtually no risk of damage during operation, no break of the sealing ring, reliable, high-performance seal stops water ingress; simple 1 part installation, keeps installation costs low, fast installation – saves time. Covalence® MEPS products are available as a uni-sleeve (pre-cut with attached closure patch).
Interested in this item or want more information?

Hours:

Phone: 610-992-9700

Email: sales@gattimorrison.com

Can't find what you want? Give us a call and we can help you find it.

Additional Information

Manufacturer: Covalence Products
For More Information on the Covalence MEPS Uni-sleeve, [Click Here] to Link to Manufacturer Web Site
 
Powered by 48ws.com
© 2024 Gatti Morrison