Details
Hydrotite is a state-of-the-art hydrophilic waterstop with unmatched durability and watersealing capacity. Comprised of Non-Bentonite, modified chloroprene rubber, Hydrotite expands up to EIGHT TIMES its original volume when exposed to water. This expansion creates an effective compression sealwithin joints of limited movement.
Recognized worldwide, Hydrotite has a proven track record as a high quality and cost effective solution to your water containment needs.
Leakmaster LV-1 is a single component water-swelling sealant with excellent and unique properties. Leakmaster may be applied in locations where conventional solid sealants cannot be easily applied.
Hydrotite Waterstop Physical Properties
| Property |
Test Method |
Unit |
Hydrophilic |
Rubber |
Chloroprene |
Rubber |
|
|
|
Minimum |
Typical |
Minimum |
Typical |
| Tensile Strength |
ASTM D412 |
lb/in2 |
350 |
366 |
1300 |
1570 |
| Elongation |
ASTM D412 |
% |
600 |
670 |
400 |
450 |
| Hardness |
ASTM D2240 |
Shore A |
52+/-5 |
54 |
50+/-5 |
50 |
| Tear Resistance |
ASTM D624 |
lb/in |
50 |
60.3 |
100 |
123 |
| Specific Gravity |
ASTM D792 |
|
1.32+/-0.1 |
1.32 |
1.38+/-0.1 |
1.38 |
Leakmaster Physical Properties
General Properties
| Appearance |
Putty-Like |
| Color |
Grey |
| Specific Gravity |
1.30 |
| Extrudability |
Within 20 seconds (at 23¡C) |
| Slump |
3mm max. (at 23¡C) |
| Tack-Free Time |
Within 8 hours (at 23¡C, 60% R.H.) |
|
JIS-A-5758 |
Properties AFTER HARDENING
| Hardness |
35 Shore A |
| Tensile Strength |
Tensile Strength |
| Elongation |
1250% |
| Tear Strength |
10 kgf/cm (56 lb/in) |
|
JIS-K-6301 |
Adhesion Properties
| Hardness |
Steel |
Aluminum |
Mortar |
| 50% Modulus (kgf/cm2) |
4.5 64 psi |
6.5 92 psi |
6.5 92 psi |
| Max. Tensile Strength (kgf/cm2) |
7.0 99 psi |
12.2 173 psi |
11.1 157 psi |
| Elongation at Break (%) |
330 |
580 |
570 |