Acrylic Primer

15040000

CTS Cement MFG Company

Quick Overview

    Acrylic Primer

    High-Adhesion Acrylic Latex Primer

    PRODUCT DESCRIPTION:
    Rapid Set Acrylic Primer is a concentrated, solvent free acrylic latex primer that improves the adhesion of Rapid Set TRU Self Leveling to properly prepared concrete. Rapid Set Acrylic Primer also acts to seal porous concrete surfaces to prevent pinholes and bubbles from forming in the finished surface.

Interested in this item or want more information?

Hours:

Phone: 610-992-9700

Email: sales@gattimorrison.com

Can't find what you want? Give us a call and we can help you find it.

Details


Using Acrylic Primer

SUBSTRATE PREPRATION:
Rapid Set Acrylic Primer is for use on properly prepared, dry, porous concrete surfaces only. Substrate must be clean, sound, and free of oil, curing compounds, dust, mastic and other bond-breakers. Mechanically profile surface by hydroblasting, shotblasting, sandblasting, or grinding. Scarifying or acid etching the concrete surface is not recommended.

MIXING AND APPLICATION:
Shake well to ensure primer is thoroughly mixed and there is no sediment in container bottom. Add 1 part primer to 1 part water in a clean container. Mix at low speed with a drill and Jiffler type mixing paddle.
Apply primer to substrate and work into the concrete surface with a stiff-bristle push broom. Spread evenly to thoroughly coat surface and avoid any puddling. Maintain materials, surface, and ambient temperatures above 50° F.
For excessively porous or absorbent concrete surfaces double prime the surface with an initial application of primer diluted 3 parts water to 1 part primer, wait 3 hours, then prime normally as above.
Let primed surface dry to a tacky, transparent thin film (min. 3 hrs, max. 24 hrs). Lower temperatures and/or higher humidity will extend required minimum drying time. When primer is dry, apply Rapid Set TRU Self Leveling according to instructions on bag.

SURFACE PREPARATION:
Substrate must be clean, sound, and free of oil, curing compound, dust, mastic and other bond-breakers. Mechanical methods of surface preparation such as hydroblasting, shotblasting or sandblasting are preferred. Acid etching the substrate is not recommended. Surface must be dry, have a minimum temperature of 50°F and be properly primed.

Yield & Packing:
Rapid Set Acrylic Primer is available in 1 gallon jugs. Coverage is about 400–600 sq. ft. per gallon. Shelf life: 12 months if kept in a cool environment, out of direct sunlight. Do not allow material to freeze.

PRECAUTIONS:
Avoid contact with eyes and skin. Close container after each use. Do not reuse container. Dispose of container and primer residue in accordance with federal, state, and local waste disposal regulations. Do not flush primer down drains, sewers, or waterways. Carefully read and follow all cautions and warnings on product label. For complete safety information please refer to product MSDS available at www.ctscement.com. If material comes in contact with eyes, flush with cool, clean water for 15 minutes with eyes open. If irritation persists consult a physician. If material comes in contact with skin, wash thoroughly with soap and water. If irritation persists consult a physician. Always use in a well ventilated area, avoid inhalation. KEEP OUT OF REACH OF CHILDREN. Rapid Set Acrylic Primer is non-toxic, non-explosive, and non-flammable.

Additional Information


Manufacturer: CTS Cement MFG Company
For More Information on the Acrylic Primer, [Click Here] to Link to Manufacturer Web Site

 
© 2024 Gatti Morrison