Protective Sealer

Surface Shine

Spec Chem

A transparent, high gloss, non-yellowing acrylic polymer engineer as a cure and seal specifically for exterior surfaces such as exposed aggregate, natural stone, brick, quarry tile, terrazzo, and other concrete surfaces. It is also suitable for interior applications. Surface Shine enhances the appearance of all treated surfaces with a high gloss sheen. It's also available in water-based.

Quick Overview



  • The concrete surface must be clean and free of standing water. Remove any sealer or other material that may inhibit adhesion of the sealer.
  • Always apply decorative sealers at the specified rate (typically 200-300 sq. ft. per gallon). Product may be sprayed with a hand help "pump-up" sprayer or an airless industrial sprayer. If roller applied, use a short napped solvent resistant sleeve.
  • Two applications are recommended when an extra high gloss is desired or on especially porous surfaces. Allow the first application to cure before the second application. Dry time will be influenced by both temperature and humidity. Apply second application at a right angle to the first application to provide uniform, consistent coverage.
Interested in this item or want more information?

Hours:

Phone: 610-992-9700

Email: sales@gattimorrison.com

Can't find what you want? Give us a call and we can help you find it.

Additional Information


Manufacturer: Spec Chem

 
© 2024 Gatti Morrison