Adjustable Veneer Anchor

The HB-213 is an adjustable veneer anchor for metal stud and wood stud construction.

The compressed leg 2X-HOOK™ has been tested and designed to withstand over 200-lbf, in tension or compression, at maximum allowed offset (ACI 530 6.2.2.5.5.4) of 1-1/4” (disengagement of the pintle from the veneer anchor). These results exceed BIA recommendations and the capabilities of standard “round wire” hooks or pintles by over 100%!

The L-shaped plate section has numerous ribs for added strength and 9/32″ holes for connecting screws.
The eyelets allow 2X-HOOK™ (pintle) insertion (1 1/4″ maximum allowable eccentricity) and are sized to prevent in-and-out movement beyond allowable tolerances.
For concrete, CMU or brick backup, use the HB-5213.
Formerly called the HB-200/DA-213 or HB-200 Adjustable Veneer Anchor
NOTE: 2X-HOOK™ CAN BE INSTALLED WITH LEGS POINTING UP OR DOWN.
The embedded portion of the 2X-Hook is 3/16”DIA round wire, satisfying the code requirement that the mortar bed thickness (typically 3/8”) must be twice the diameter of the wire.

GAUGES:
14 ga. or 12 ga. thick

AVAILABLE FINISHES:
Hot-dipped Galvanized
Stainless Steel (Type 304 or Type 316)

DIMENSIONS:
2X-HOOK™ lengths: 3” (300H-2X), 4” (400H-2X), 5” (500H-2X), 6” (600H-2X), and 7” (700H-2X)

SEISIMIC OPTIONS:
Veneer can be reinforced with optional Seismiclip® Interlock System (HB-213 S.I.S. )
Veneer can be reinforced with optional Seismic Hook (HB-213 SH Seismic Veneer Anchor )
Veneer can be reinforced with optional Welded Seismic Clip (Seismic Clip 300C w/HB-213 )

Open/download DATASHEET

 

SKU: HB-213 Category: Tag:

Description

Use https://www.h-b.com/images/submittal/15HB200VA0000.pdf for submittal

Additional information

Backplate Finish

Hot-Dipped Galvanized, Stainless Steel – Type 304, Stainless Steel – Type 316

Backplate

0", 1", 1.5", 2", 2.5", 3", 3.5", 4", 4.5", 5", 5.5", 6"

Backplate Thickness

14 ga. (1.9 mm), 12 ga. (2.7 mm)

3/16ӯ Compressed Leg Hook Length:

3” (300H-2X), 4” (400H-2X), 5” (500H-2X), 6” (600H-2X), 7” (700H-2X)

Brand

Hohmann & Barnard INC.